Magnum-energy CSW1012 Manual de usuario descargar pdf (Pagina 7)

2.0 Installation

Review this section and the Important Product Safety Instructions before

proceeding with the installation of your inverter.

WARNING: Installations should be performed by qualiﬁ ed per-

sonnel, such as a licensed or certiﬁ ed electrician. The installer

determines which safety codes apply and ensures all applicable

installation requirements are followed. Applicable installation codes

vary depending on the speciﬁ c location and application.

WARNING: Review the “Important Product Safety Information” on

page ii and adhere to all cautionary markings located on the inverter

and on the batteries.

2.1 Pre-Installation

Before proceeding, read the entire Installation section to determine how

best to install your CSW1012 inverter. The more thorough you plan in the

beginning, the better your inverter needs will be met. The simpliﬁ ed system

diagram shown in Figure 2-1 should be reviewed to assist you in planning

and designing your installation. This drawing is not intended to override or

to restrict any national or local electrical codes. This drawing should not be

the determining factor as to whether the installation is compliant, that is the

responsibility of the electrician and the onsite inspector.

2.1.1 Installation Guidelines

• Before connecting any wires, determine the cable routes throughout the

home or vehicle/boat, both to and from the inverter.

• Always check for existing electrical, plumbing, or other areas of poten-

tial damage BEFORE drilling or cutting into walls.

• Make sure all wires have a smooth bend radius and do not become kinked.

• If installing this inverter in a boat, RV or truck, ensure the conductors

passing through walls, bulkheads, or other structural members are pro-

tected. This minimizes insulation damage (such as chaﬁ ng) which can

be caused by vibration or constant rubbing.

2.1.2 Unpacking and Inspection

Carefully remove the inverter from its shipping container and inspect all

contents. Verify the following items are included:

• CSW1012 inverter

• CSW1012 Owner’s Manual

If items appear to be missing or damaged, contact your authorized Magnum

Energy dealer or Magnum Energy.

*** Save your proof-of-purchase as a record of your ownership; it is

needed if the unit should require in-warranty service. ***

2.1.3 Tools Required

Installing the inverter is simple and requires the following:

• Adjustable wrench (10mm) • Level • Drill

•

#10 Mounting screws (x4) • Pencil • Drill bits

• Phillips screwdriver

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios

Magnum-energy CSW1012 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Magnum-energy CSW1012