Magnum Energy ME-RC Manual del operador descargar pdf (Pagina 13)

 2003 - Magnum Energy, Inc.

Specifications

Electrical Requirements 12 VDC

Controls Charger (ON/OFF),

Inverter (ON/OFF)

LED Indicators Power, Fault, Charger, Inverter

Soft Keys Shore, AGS, Meter, Setup, Tech

Selector Switch Rotary (press to accept)

Display LCD (2 line)

Cable type 4 wire twisted pair

Weight 0.5 lb (0.22 kg)

Dimensions 3.75" H x 5.75" W x 1.125" D

(9.5 cm H x 16.6 cm W x 2.9 cm D)

Cutout Dimensions 2.75" H x 4.75" W

(7 cm H x 12 cm W)

Specifications at 25 °C - subject to change without notice.

Fault Conditions

Low Battery –

The unit has shut down because the battery voltage is

below the set point in LBCO. It will automatically restart

when battery voltage rises above 12.4 VDC.

High Battery –

The unit has shut down because the battery voltage has

exceeded 15.5 VDC. It will automatically restart when the

battery voltage drops below 15.0 VDC.

Overtemp –

The unit has shut down because the temperature at the

transformer or FET board has exceed the safe temperature

operating range. It will automatically restart after unit cools

down.

AC Overload –

The unit has shut down because the AC load connected to

the inverter’s output exceeded its maximum output rating.

NOTE: When this occurs, reduce the load and MANUALLY

restart the unit.

4. Troubleshooting and Specifications

1 2 ... 8 9 10 11 12 13 14 15

Sin comentarios

Magnum Energy ME-RC Manual del operador Pagina 13