Magnum Energy M-RC Manual del operador Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
2004 - Magnum Energy, Inc.
12
4. Operation
The AGS Remote Control is equipped with a wide range of
easy-to-use switches and displays, allowing you to quickly
setup your inverter/charger as well as determine its operational
status. The "AGS" soft key controls the operation of the net-
worked AGS Controller (refer to figures on page 11).
Rotary SELECT Knob
Similar to a dash radio knob, use the SELECT knob to move
between menus and select program options. Turn the knob
clockwise to increase value or counter-clockwise to the decrease
value. Press the knob to "save" the selection.
AGS Soft Key
Press the AGS soft key to access AGS menu and then turn the
rotary "SELECT" knob to view the following menu items (refer
to table 2 on page 14).
AutoGenSt Cntrl 
Used to turns the AGS (Auto Gen Start) ON and OFF or to enable "Quiet Time."
AutoGenSt OFF 
Disables the Auto Gen Start function.
AutoGenSt Enabl 
Enables the AGS system to automatically start the generator based on the
coachs interior temperature or low battery voltage conditions. Temperature
and voltage settings are selected using the AGS Controller (page 11).
AutoGenSt Test 
Starts and runs the generator for 30 seconds, fully testing the AGS system.
AGS w/Quiet Time 
Identical to the ENABLE setting above but sets QUIET TIME. When this
selection is made, the Set Current Time (clock) menu appears, prompting you
to set the current time. Set the required "QUIET TIME" hours using the AGS
Controller (see pages 10 - 11).
NOTE: If the generator is running when START QUIET TIME is reached, it will
automatically stop and will not start again until END QUIET TIME is reached.
Set Current Time 
When you access the Set Current Time menu, press the Select knob. This
displays the "Set Hour" menu. Turn the SELECT knob clockwise to increase the
hour or counter-clockwise to decrease the hour. Press the knob to save the
setting and advance to the Set Minutes menu. Repeat the steps and advance
to the "Set AM/PM." Press the knob to save your selection.
NOTE: If the current time is correct, you can press any of the soft keys to
escape without affecting the settings or the press the SELECT knob to advance
through the various fields.
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios